Inlet/Outlet Position Using Access Chamber/s

Access Chamber/s are specified for inlets/outlets to the system. The grid is only representative of a StormBrixx tank and provides a rough guide to where inlets and outlets will be placed.

Position your Access Chamber/s for inlets/outlet pipes

Click on the outside of the grid to place Access Chamber/s which will hold inlet/outlet pipes or double click for Access Chamber/s used for maintenance. The pipe will be shown as a double arrow symbol on the grid. The grey panel below will show how many inlet/outlets need to be placed and how many have been placed.

You have 2 of 4 Inlet/Outlets to place

Access Chamber/s

Access Chamber/s (for maintenance)

Outlet/Inlet pipes

How many pipe inlet/outlet Access Chamber/s
will be used for maintenance access?

You have added maintenance access to 0 of the 4 units

ACO would highly recommend that you allow some form of access into the tank for maintenance and inspection purposes.

Access Chamber/s for outlet/inlets can only be placed on
perimeter of grid (perimeter of the final tank)